Intelligent Operator Panel IOP Handheld

IOP Handheld for the mobile use

The Intelligent Operator Panel IOP Handheld is a very userfriendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of the SINAMICS G110D distributed inverter.

The IOP supports both entry-level personnel and drive experts. Thanks to the large plain text display, the menu prompting and the Application Wizards, it is easy to commission standard drives. A drive can be essentially commissioned without having to use a printed parameter list as the parameters are displayed in plain text, explanatory help texts are provided and the parameter filtering function.

Application Wizards interactively guide you when commissioning important applications such as conveyor technology, pumps, fans and compressors.

There are Quick Commissioning Wizards for general commissioning. The drives are manually and simply controlled using directly assigned buttons and the navigation wheel. The IOP Handheld has a dedicated switchover key to switch over from the automatic to the manual mode.

The inverter can be diagnosed in a user-friendly fashion using the plain text display of faults and alarms. Help texts can be obtained by pressing the INFO button.

Up to two process values can either be graphically or numerically visualized on the status screen/status display.

Process values can also be displayed in technological units. The IOP Handheld supports series commissioning of identical drives. For this purpose, a parameter list can be copied from an inverter into the IOP Handheld and when required, downloaded into other drive units of the same type.

The IOP Handheld includes the following language packages: English, French, German, Italian and Spanish.

In addition to the IOP, the IOP Handheld includes a housing with the rechargeable batteries, charging unit and RS232 interfacecable. The charging unit is supplied with connector adapters for Europe, the US and UK. When the batteries are fully charged, the operating time is up to 8 hours.

To connect the IOP Handheld to SINAMICS G110D, the RS232 interface cable with optical interface is required in addition.

Updating the IOP Handheld

The IOP Handheld can be updated and expanded using the integrated USB interface.

Data to support future drive systems can be transferred from thePC to the IOP Handheld via drag & drop. Further, the USB interface allows user languages and Wizards that become available in the future to be subsequently downloaded and the firmware updated for the IOP Handheld.

The IOP is supplied with power via the USB interface during an update.

Selection and ordering data

Manual-local control with keyswitch

Example: SINAMICS G110D and manual-local control with integrated key-switch

The manual-local control is a simple method to locally control and commission the SINAMICS G110D distributed inverter.

To switch over from the automatic to the manual mode or to switch-off the inverter, there is a keyswitch that can be withdrawn in each of the three operating modes (Auto/Off/Local).

• The inverter is controlled via the PLC in the automatic mode
• In the OFF state, the device is shut down (however, the line supply voltage is still connected)
• The drive is locally and directly controlled in the “Local” setting. The device is simply controlled using directly assigned buttons. The following functions can be selected:
  • Switching over between continuous operation / jog mode
  • On/Counter-clockwise
  • On/Clockwise
  • Deactivate Quick Stop

The manual-local control is mounted on the inverter instead of the standard blanking cover. This means that it can be retrofitted at a later date.

Selection and ordering data

MMC memory cardMMC

The parameter settings for an inverter can be stored on the MMC memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card the drive system is immediately ready for use again. The card holder is not included with the inverter and mustbe separately ordered.

Selection and ordering data

Card holder for MMC/SD memory card

To use the MMC memory card, a card holder is required. This can be subsequently inserted under the blanking cover or under the optional manual-local control on the inverter – where it can also remain. In addition, a Secure Digital card (SD) can also be used.

SINAMICS G110D with integrated card holder (in the open state

Selection and ordering data

RS232-interface cable for communication with a PC

For controlling and commissioning an inverter directly from a PC via a point-to-point connection if the appropriate software (STARTER commissioning tool1), from Version 4.1.3 and higher) has been installed.

Selection and ordering data

USB-interface cable for communication with a PC

For controlling and commissioning an inverter directly from a C via a point-to-point connection if the appropriate software (STARTER commissioning tool ¹), from Version 4.1.3 and higher) has been installed.

Selection and ordering data

Adapter to mount SINAMICS G110D instead of SIRIUS M200D motor starter

For adaptation, there are connection boards that allow SINAMICS G110D to be mounted onto existing connection holes of the SIRIUS M200D motor starter (assuming that there is sufficient space). This means that a system can be correspondingly adapted to different requirements at a later stage.

Selection and ordering data

STARTER commissioning tool

The STARTER commissioning tool (STARTER Version from 4.1.3 and higher) supports the commissioning and maintenance of SINAMICS G110D inverters. The operator guidance combined with comprehensive, user-friendly functions for the relevant drive solution allow you to commission the device quickly and easily.

Selection and ordering data

¹⁾ The STARTER commissioning tool is also available on the Internet under
http://support.automation.siemens.com/WW/view/en/10804985/133100

AS-Interface connecting cable

Selection and ordering data

Connecting cables for digital inputs

Selection and ordering data

Connecting cables pre-fabricated at one end and connector sets to connect to the line supply

Selection and ordering data

Motor cables pre-fabricated at one end and connector sets to connect the inverter to the motor

Selection and ordering datan

Power bus distribution 400 V in IP65 degree of protection

Selection and ordering data

Additional information

For further information about the connecting cables and plug-in aconnectors mentioned above, please refer to Catalog IK PI.

Futher selected accessories are available from Siemens Solution Partners. Select „Distributed Field Installation System“ as technology in the „SolutionPartner Finder“.
http://www.siemens.com/automation/partnerfinder